Elation RAYZOR 360Z User Manual page 20

EDIT PROGRAM – Record Controller – Working With Built-In Program [continued]
To start an Auto Program proceed as follows:
1. Slave Setting
• Select "Function Mode".
• Press ENTER to confirm.
• Select "Set to Slave".
• Press ENTER to confirm.
• Select "Slave 1", "Slave 2" or "Slave 3".
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
2. Automatic Program Run
• Select "Function Mode".
• Press ENTER to confirm.
• Select "Auto Program".
• Press ENTER to confirm.
• Select "Master" or "Alone".
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
3. Program Selection for Auto Pro Part
• Select "Edit Program".
• Press ENTER to confirm.
• Select "Select Programs".
• Press ENTER to confirm.
• Select "Auto Pro Part 1", "Auto Pro Part 2" or "Auto Pro Part 3", and select which
Slave program is to be sent. Selection "Part 1" means, that the Slave unit runs the
same program as the master units.
• Press ENTER to confirm.
• Press MODE/ESC in order to return to the main menu.
20