7
Maintenance and Repair
Introduction into Repairing the Fluorescence Detector
Simple Repairs
The detector is designed for easy repair. The most frequent repairs such as
flow cell change can be done from the front of the detector with the detector in
place in the system stack. These repairs are described in
page 111.
Exchanging Internal Parts
Some repairs may require exchange of defective internal parts. Exchange of
these parts (including flash lamp) requires removing the detector from the
stack, removing the covers, and disassembling the detector. The security lever
at the power input socket prevents the detector cover from being removed
when line power is still connected. These repairs are described in
the Service
106
Manual.
"Maintenance"
"Repairs" in
1200 Series FLD User Manual
on