Safety Regulations; Important Instructions And Explanations; Accident Prevention Regulations - AEG Protect 5.31 Series Operating Instructions Manual

1

Safety Regulations

1.1

Important Instructions and Explanations

i
1.2

Accident Prevention Regulations

Protect 5.31/xxx-480-220-120 10 kVA - 120 kVA
The instructions for operation and maintenance, as well as the
following safety regulations must be complied with to ensure the
safety of personnel as well as the continued availability of the unit.
All personnel installing/dismantling, starting up, operating or servicing
the units must be familiar with and observe these safety regulations.
Only trained and qualified personnel may perform the work described,
using tools, equipment, test equipment and materials intended for the
purpose and in perfect working condition.
Important instructions are highlighted by "CAUTION:",
"ATTENTION:", "NOTE:" and indented text.
CAUTION:
This symbol identifies all working and operational procedures
requiring absolute compliance to avoid any danger to persons.
ATTENTION:
This symbol identifies all working and operational procedures
requiring absolute compliance to prevent any damage, irreparable
or otherwise, to the UPS or its components.
NOTE:
This symbol identifies technical requirements and additional
information requiring the operator's attention.
This document includes brief instructions which describe the function
and start-up of the UPS.
These instructions must be glued to the free area on the inside of the
unit door.
Compliance with the accident prevention regulations valid in the
respective country of use and the general safety regulations in
accordance with IEC 364 is mandatory.
The following safety instructions must be observed prior to any work
on the UPS:
•
Disconnect the unit from the power supply.
•
Secure against reclosing.
•
Verify that the unit is disconnected from the power supply.
•
Earth and short circuit the unit.
•
Provide protection by covers or barriers for any
neighbouring live parts.
Page 6 of 56 8000020680 BAL, en