Harmar Mobility Pinnacle Installation And Service Manual page 10

Installation Procedures
Step 5: Position the rear seat support onto the two (2) seat-leveling bolts on the
backside of the chassis by aligning the large opening at the slot ends of the footrest.
Secure the rear seat support to the footrest/seat support using the two (2) hex-head
bolts and washers.
Secure the rear of the slider rails to the rear seat support using the two (2) socket
bolts.
Ensure that the seat support is level and tighten the two (2) front and two (2) rear
leveling bolts.
Step 6: Connect the footrest cable to the 6-pin connector on the chassis.
TIP!
When the 6-pin footrest and the 8-pin chair cables are both connected to the chas-
sis, the black installation switch on the chassis is disabled and will not function.
10
Pinnacle HD Stair Lift Manual | | www.Harmar.com | 866-351-2776
P/N: 75403 RevB 72618