Harmar Mobility Pinnacle Installation And Service Manual page 11

Installation Procedures
Step 7: Align the seat rollers with the slider rails and slide the seat half way back.
Step 8: Swivel seat approximately 45° to one side.
Step 9: Attach the swivel pin bracket with the flat side towards the footrest
support using the two (2) hex head bolts and washers. Ensure that one of
the swivel pins is engaged into the slot in the swivel cam.
Step 10: Connect the seat cable to the 8-pin connector on the chassis.
11
866-351-2776 | www.Harmar.com | | Pinnacle HD Stair Lift Manual
P/N: 75403 RevB 72618