Step 2 - Use Scwin Short Cut To Program Datalogger And Generate Wiring Diagram; Wind Monitor Mounted To A Cm200 Series Crossarm With Pn 008285 Nurail - Campbell 05103 User Manual

7.
8.
9.
CM200 Series Crossarm
Figure 4-1. Wind monitor mounted to a CM200 Series Crossarm
Step 2 — Use SCWin Short Cut to Program Datalogger and
4.2
Generate Wiring Diagram
The simplest method for programming the datalogger to measure the Wind
Monitor is to use Campbell Scientific's SCWin Short Cut Program Generator.
Use the torpedo level to ensure that the Wind Monitor is level.
Route the sensor cable along the underside of the crossarm to the tripod or
tower, and to the instrument enclosure.
Secure the cable to the crossarm and tripod or tower using cable ties.
®
with pn 008285 Nurail
User Manual
Wind Monitor
pn 008285 Nurail®
Mounting Pipe
(supplied with sensor)
3