26.
Accept
27.
Cancel
6.2.
Touchscreen controller quick start
Note
Press
on any quick start screen to reset the screen back to its default settings, excepted
on the "Assistance interval" screen.
Note
Steps 6.2.2. and 6.2.3. are optional and are not required to start the system. All controller
settings may be changed after the unit is in service.
Note
If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
6.2.1. Format screen
After plugging in the unit for the first time, the format screen is displayed.
Note
Happens until Assistance Name is set.
Press the language button and use the arrows
English, French, German, Italian, Spanish, Dutch or Portuguese.
Press the units button and use the arrows
or metric).
Ref. MKT-IM-006 / B - 16.01.2018
Installer Manual Fleck 5800 - XTR - Programming
→ Press to save or accept changes in controller configuration.
→ Press to cancel configuration and exit to previous screen
without saving.
Format
language
units
hardness units
to adjust the system's units of measure (either U.S.
english
metric
mg/L
to adjust the system's displayed language:
53 / 122