Format Screen - Pentair FLECK 5800 XTR Installer Manual

Installer Manual Fleck 5800 - XTR - Programming

6.4.1. Format screen

From the master settings screen press the format button to display the format screen.
language: Displays the language used on the controller: English, French, German, Italian, Spanish,
Dutch or Portuguese.
units: Contains settings for the unit type (either US or Metric) to be used in the controller.
hardness units: Contains settings for hardness units of measure (grains per gallon, mg/L or ppm,
German degrees, French degrees, or English degrees).
Note
Hardness units are adjustable only if metric units are selected.
Note
Degree hardness units are converted to ppm upon input. Degree inputs may be rounded up
or down to the nearest ppm equivalent.
Press the screen navigation arrows at the upper-right and left of the screen to navigate to the
assistance name, assistance phone, and assistance interval screens. See 6.2. Touchscreen controller
quick start, page 53 for more information about these settings.
Press to save changes or press
66 / 122
Format
language
units
hardness units
to return to the master setting screen without saving.
english
metric
mg/L
Ref. MKT-IM-006 / B - 16.01.2018