H3C S3600 Series Operation Manual page 15

System maintenance and debugging

Hide thumbs Also See for S3600 Series:

Table of Contents

Operation Manual – System Maintenance and Debugging

H3C S3600 Series Ethernet Switches-Release 1510

<H3C> ftp 10.1.1.1

Trying ...

Press CTRL+K to abort

Connected.

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User(none):abc

331 Give me your password, please

Password:

230 Logged in successfully

[ftp] get S3600.btm

[ftp] bye

Note:

When using different FTP server software on PC, different information will be output to

the switch.

Step 2: Update the BootROM program on the switch.

<H3C> boot bootrom S3600.btm

This will update BootRom file on unit 1. Continue? [Y/N] y

Upgrading BOOTROM, please wait...

Upgrade BOOTROM succeeded!

Step 3: Restart the switch.

<H3C> reboot

Note:

Before restarting the switch, make sure you have saved all other configurations that

you want, so as to avoid losing configuration information.

Loading host software

Loading the host software is the same as loading the BootROM program, except that

the file to be downloaded is the host software file, and that you need to use the boot

boot-loader command to select the host software used for next startup of the switch.

After the above operations, the BootROM and host software loading is completed.

Pay attention to the following:

The loading of BootROM and host software takes effect only after you restart the

switch with the reboot command.

Chapter 1 BootROM and Host Software

1-13

Table of Contents