H3C S3600 Series Operation Manual page 25

Operation Manual – System Maintenance and Debugging
H3C S3600 Series Ethernet Switches-Release 1510
Debugging information Debugging information Debugging information Debugging information
Protocol debugging setting Protocol debugging setting
Terminal display setting Terminal display setting
Figure 2-1 Debugging information outpu
You can use the following commands to perform the settings.
Table 2-11 Enable debugging and terminal display
Enable system debugging
for specific module
Enable terminal display
for debugging
ON ON ON ON
OFF OFF OFF OFF
Operation
debugging
module-name
[ debugging-option ]
terminal debugging
Chapter 2 Basic System Configuration
OFF OFF OFF OFF ON ON ON ON
ON ON ON ON
t
Command
By default, all debugging is
disabled in the system.
Because
debugging information will
affect the efficiency of the
system,
debugging after you finish it.
By default, terminal display
for debugging is disabled.
2-5
& Debugging
Description
the output of
disable your