Notes
Only use easy-pour liquid products
■
that the manufacturer recommends
adding to the detergent drawer.
Do not mix different liquid
■
detergents. If changing your liquid
detergent (type, manufacturer, etc.),
empty the dispenser completely and
clean it. ~ Page 46
Do not use products containing
■
solvents, caustic agents or volatile
substances (e.g. bleach).
Do not mix detergent and fabric
■
softener.
Do not use products that have
■
expired or are highly congealed.
To prevent drying out, do not leave
■
the dispenser lids open for a long
period of time.
Filling the dispensers:
The dispenser covers in the detergent
drawer are marked with the following
symbols:
ß Standard/universal detergent
■
i Fabric softener
■
Open the detergent drawer.
1.
Open the dispenser cover(s).
2.
Add detergent/fabric softener. Do
3.
not fill above the max. marking.
Close the cover(s).
4.
Slowly push the detergent drawer in
5.
completely.
When the detergent drawer is fully
pushed in, the display ù goes out
when the appliance is switched on.
Intelligent dosing system
Everyday use
Displays:
The display lights up if intelligent
■
dosage has been selected for the
dispenser.
The display for the adjustment
■
values, e.g. K flashes if the fill level
for the dispenser is below the
minimum level when intelligent
dosing has been selected.
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for all programmes in which intelligent
dosing can be used.
You can find an overview of all possible
programme settings on the
supplementary sheet for the installation
and operating instructions.
The dosage strength has been preset to
L (lightly soiled laundry) for detergent w
and to K (medium level of softness) for
fabric softener i. It can be changed
individually for each programme.
~ Page 27
In addition to intelligent dosing, washing
additives (e.g. stain remover) can be
added manually via the left-hand
compartment. ~ Page 43
en
41