Saving Energy And Detergent; Programme Default Settings; Temperature; Spin Speed - Bosch WAT Series Instruction Manual And Installation Instructions

Up to 8kg
Table of Contents

Advertisement

Programme default settings

en

Saving energy and detergent

For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
Saving
Soiling/note
Reduced temper-
Light
ature and deter-
No visible dirt or stains. Cloth-
gent quantity as
ing has taken on some body
per the recom-
odour, e.g.:
mended dosage
Normal
Visible dirt or a few light
stains, e.g.:
Temperature as
Heavy
per the care label
Dirt and/or stains clearly visi-
and detergent
ble, e.g. tea towels, baby
quantity as per
items, work clothing
the recom-
mended dosage
for heavy soiling
When measuring the amount of
Note:
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~ Page 31
26
Light summer/sports
clothing (worn for a few
hours)
T-shirts, shirts, blouses
(worn for up to one day)
Guest bed linen and hand
towels (used for one day)
T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
Towels, bedding (used for
up to one week)
0
Programme default
settings
T he programme default settings are
P r o g r a m m e d e f a u l t s e t t i n g s
displayed and can be changed in the
touch display after the programme is
selected.
You can find an overview of all possible
program settings on the supplementary
sheet for the installation and operating
instructions.

Temperature

Depending on what stage the
programme is in, you can change the
set temperature before and during the
programme.
The maximum temperature that can be
set depends on the programme that has
been selected.

Spin speed

Depending on what stage the
programme is in, you can change the
spin speed (in rpm; revolutions per
minute) before and during the
programme.
Setting 0: No spin; the water is only
drained. The laundry stays wet inside
the drum, e.g. for items that should not
be spun.
The maximum speed that can be set
depends on the model and the
programme that has been selected.

Advertisement

Table of Contents
loading

Table of Contents