Operating The Appliance; Preparing The Washing Machine; Switching On The Appliance/Selecting A Programme; Calling Up Additional Programmes - Bosch WAT Series Instruction Manual And Installation Instructions

Operating the appliance

en
1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 13
Connect the mains plug.
1.
Turn on the water tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
The current settings and programme
information light up at full brightness
and the display A flashes.
The settings that can be selected light
up at half brightness.
Notes
Temporary flashing of the displayÛ
■
informs you to run the programme
Drum Clean or any other
programme soon at a washing
temperature of at least 60 °C.
If the E 3 sec display flashes, the
■
childproof lock is active.
You must deactivate this first before
you can change settings or start the
programme. ~ Page 32
30
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting a programme.
The light switches off automatically.
You can:
Use this programme and load
■
laundry. ~ Page 31
Or select another programme.
■
You can find an overview of all
programmes on the printed
supplement for the installation and
operating instructions.
Or change the programme default
■
settings. ~ Page 31
And/or select additional programme
■
settings. ~ Page 31
Calling up additional
programmes
You can call up additional programmes
via the Home Connect app:
Connect the appliance to your home
1.
network and to the Home Connect
app. ~ Page 34
Select the Additional programs
2.
programme.
'˜˜ will appear on the display.
You can also select
Tip:
programmes directly via the Home
Connect app.
Select the programme you want to
3.
call up in the Home Connect app.
The settings for the selected
programme will appear on the
display.
Adjust the programme settings if
4.
necessary and press Start/Pause ‹.
If you press Remote start briefly
Tip:
on the appliance beforehand, you will
also have the option of starting the
programme via the Home Connect
app.