Positioning And Connecting; Included With The Appliance; Safety Instructions - Bosch WAT Series Instruction Manual And Installation Instructions

5
Positioning and
connecting
I ncluded with the appliance
P o s i t i o n i n g a n d c o n n e c t i n g
Check the machine for transport
Note:
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from whom
you purchased the appliance, or our
after-sales service.
( Mains cable
0 Bag:
Installation and operating instructions
■
After-sales service location directory*
■
Warranty*
■
Cover caps for openings left after
■
removing the transport locks
Wrench*
■
8 Water supply hose on Aqua-Stop models
@ Water drain hose
H Elbow for securing the water drain hose*

Positioning and connecting

P Water supply hose on standard/Aqua-
Secure models
*depending on the model
In addition, a hose clamp ( 24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
Spirit level for levelling
■
Wrench with:
■
– WAF 13 for loosening the
transport locks, and
– WAF 17 for aligning the
appliance feet

Safety instructions

:
Warning
Risk of injury!
The washing machine is very heavy.
■
Be careful when lifting/transporting
the washing machine.
When the washing machine is lifted
■
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
en
13