Hose And Cable Lengths; Water Inlet - Bosch WAT Series Instruction Manual And Installation Instructions
Up to 8kg
Hide thumbs
Also See for WAT Series:
Table of Contents
Advertisement
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Unscrew and remove all four
2.
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
Fit the covers. Lock the covers firmly
3.
in place by applying pressure to the
snap-in hooks.
Positioning and connecting
Hose and cable lengths
Left-hand connection
■
Right-hand connection
■
The following are available from
Tip:
specialist dealers/the after-sales
service:
An extension for Aqua-Stop or cold
■
water supply hose (approx. 2.50 m);
order no. WMZ2380, WZ10130,
CZ11350, Z7070X0
A longer supply hose (approx.
■
2.20 m) for standard model
Water inlet
:
Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (it contains an electric
valve).
en
15
Advertisement
Table of Contents
