Table of Contents
Advertisement
Install the tire/wheel assembly as normal. Rim measurements are not required.
Lower the hood and spin.
If SmartWeight requires correction weights wheel dimensions will be required.
Enter the dimensions using the dataset arms. The SmartWeight tire graphs will
display red for excessive forces and green for acceptable amounts of force. Prior to
measurement the tire graphs will display no color.
The screen will display the amount and location of corrective weight necessary.
Install the weights in the appropriate manner using the correct type of weight and
lower the hood to re-spin and check the balance.
Instead of displaying zeros in the weight display, SmartWeight displays "OK,"
indicating that the force levels are reduced to within the acceptable tolerances.
36 • 4. Balancing a Wheel
GSP9700 Series Road Force Measurement System Operation
Advertisement
Table of Contents
