About The Xbee-Pro 900Hp Rf Module; User Guide Structure - Digi XBee-PRO S3 User Manual

About the XBee-PRO 900HP RF Module

The XBee-PRO 900HP RF Modules consist of firmware loaded onto XBee-PRO S3B hardware. These
embedded RF devices provide wireless connectivity to end-point devices in mesh networks.
You can build networks up to 128 nodes using the XBee devices. For larger networks of up to 1,000 or
more nodes, we offer RF optimization services to assist with proper network configuration.
For more information network configuration, contact
Note The XBee-PRO 900HP RF Module is not backward compatible with the legacy XBee-PRO 900
(Part Number: XBP09-DP...) or XBee-PRO DigiMesh 900 (Part Number: XBP09-DM...) RF modules.
The XBee-PRO S3B hardware consists of:
One Energy Micro EFM
n
One Analog Devices ADF7023 radio transceiver
n
One RF power amplifier
n
One NXP MC9S08QE32
n

User guide structure

This user guide contains documentation for two RF protocols: XStream Compatible (XSC) and 900HP.
The XSC firmware is provided for customers who need compatibility with existing networks that need
to be 9XStream compatible. Customers who do not require this compatibility should not use the XSC
firmware, but rather the newer 900HP firmware.
The XSC firmware section at the back of this user guide contains documentation for the XSC firmware
only. All other firmware documentation in the user guide is applicable to the 900HP firmware only. For
more information about XSC firmware see the
The XBee-PRO 900HP RF Module is not backward compatible with the legacy XBee-PRO 900 (Part
Number: XBP09-DP...) or XBee-PRO DigiMesh 900 (Part Number: XBP09-DM...) RF Modules.
The following table describes how to use this user guide based on the Digi part number for the
module:
XBee®-PRO 900HP/XSC RF Modules
Digi Technical
®
32G230F128 microcontroller
®
microcontroller, only in the programmable version of the XBee
XSC firmware
Support.
section.
13