Environmental Testing Criteria - Danfoss PLUS+1 MC0XX-1 series Technical Information

Technical Information
PLUS+1® MC0XX-1XX Controller Family
Product ratings

Environmental testing criteria

22 | © Danfoss | April 2018
MC controllers general ratings (continued)
Description Units
Allowable module supply Vdc
voltage
Module sensor supply Vdc
voltage
Analog input voltage levels Vdc
Allowable output load A
current (per pin)
Module allowable total A
output current
All modules Ingress
**
Protection (IP) rating
All modules CE rating
*
MC050-055/05B input voltage maximum is limited to 16 Vdc.
**
The PLUS+1® modules IP 67 rating is only valid when the module mating connector is in place and unused
connector pin positions have sealing plugs installed.
Climate environment
Description
Storage temperature
Operating temperature
Thermal cycle
Humidity
Degree of protection
Chemical environment
Description
Salt mist
Chemical resistance
Mechanical environment
Description
Vibration
Bump
Minimum Maximum
*
9 36
4.8 5.2
*
36
Applicable standard Comment
IEC 60068-2-1, test Ab, IEC
60068-2-2 test Bb
IEC 60068-2-1, test Ab, IEC
60068-2-2 test Bd
IEC 60068-2-2, test Na, IEC
60068-2-38 (partial)
IEC 60068-2-78, IEC Damp heat steady state and cyclic.
60068-2-30 test Db
IEC 60529
Applicable standard Comment
IEC 60068-2-58 test Kb
ISO 16750-5
Applicable standard Comment
IEC 60068-2-6 test Fc, IEC
6008-2-64 test Fh
IEC 60068-2-29 test Eb
Comment
Minimum allowable supply voltage
for the MC038-010 module CPU
power pin is 6 Vdc.
Sensor voltage drops below the
minimum value if module supply
voltage < 9 Vdc. Exception for
MC050-055/05B and MC024-01A, see
Sensor power supply ratings on page
20.
See individual module date sheets.
See individual module data sheets.
IP 67
CE compliant.
L1321895 | BC00000227en-US0401