User Liability And Safety Statements; Oem Responsibility - Danfoss PLUS+1 MC0XX-1 series Technical Information

Technical Information
PLUS+1® MC0XX-1XX Controller Family

User liability and safety statements

OEM responsibility

© Danfoss | April 2018
The OEM of a machine or vehicle in which Danfoss products are installed has the full responsibility for all
consequences that might occur. Danfoss has no responsibility for any consequences, direct or indirect,
caused by failures or malfunctions.
•
Danfoss has no responsibility for any accidents caused by incorrectly mounted or maintained
equipment.
•
Danfoss does not assume any responsibility for Danfoss products being incorrectly applied or the
system being programmed in a manner that jeopardizes safety.
•
All safety critical systems shall include an emergency stop to switch off the main supply voltage for
the outputs of the electronic control system. All safety critical components shall be installed in such a
way that the main supply voltage can be switched off at any time. The emergency stop must be easily
accessible to the operator.
L1321895 | BC00000227en-US0401 | 5