Table of Contents
Advertisement
Figure 5-14 Inputting password
The user can observe the following procedures to change password:
1. Press the
key to move the cursor to the 'Monitor', see Figure 5-19.
Figure 5-15 Monitor Interface
2. Press the key, then press the key to select the 'Change settings password', see Figure 5-20.
Figure 5-16 Changing setting password
3. Press the
key, the interface shown in Figure 5-21 will appear.
Vertiv|Liebert® S600 10kVA ~ 20kVA UPS | User Manual
66
Advertisement
Table of Contents
