Liebert S600 User Manual page 42

For output page, all the settings must unplug the REPO terminal (forcible output shutdown), otherwise the
interface shown in Figure 4-8 will appear
Finish page
For 10kVA model, the interface shown in Figure 4-9 will appear. Click Finish to enter the Flow page, then the user can
operate the UPS normally.
For 20kVA model, the interface shown in Figure 4-10 will appear. It means that the functional keys and LCD are
invalid; the user cannot continue the operation. Please power off the UPS based on the prompt shown in Figure
4-10, confirm that the actual wiring method of the output terminal is the same as that of the setting method, then
power on the UPS again.
After the start-up, the user can operate the UPS normally,
Vertiv|Liebert® S600 10kVA ~ 20kVA UPS | User Manual
Figure 4-8
Prompt of removing REPO terminal
Figure 4-9
Initial start-up guidance (5)
42