Allen-Bradley 2711P Technical Data Manual page 11

Cat. No. 2711P-RSACDIN, AC to DC Power Supply
To Ground Bus
Protective Earth
120/230V AC L2/N
120/230V AC L1
Cat. No. 2711P-RSACDIN, AC to DC Power Supply
To Ground Bus
Protective Earth
120/230V AC L2/N
120/230V AC L1
AC-to-DC Power Supply to Power Nonisolated DC Terminals
Powering a PanelView Plus terminal with a nonisolated DC logic module from
an AC power source requires an AC-to-DC power supply with a UL Class 2 or
SELV output, or the 2711P-RSACDIN power supply.
Catalog number 2711P-RSACDIN is a UL accepted power supply for the
PanelView Plus terminals. The power supply converts AC power to DC power,
provides a SELV output, and has electrical input ratings of 85...264V AC
(47 ...63 Hz).
These are the electrical output ratings of the power supply:
• 24V DC nominal
• 3 A maximum
For more information on this power supply, refer to the AC Power Supply
Installation Instructions, publication 2711P-IN005.
Figure 4 - Powering a Nonisolated DC Terminal from an AC Power Source
DC - DC+
DC +
DC -
Rockwell Automation Publication 2711P-TD001D-EN-P - February 2011
Wiring and Grounding Guidelines for PanelView Plus Terminals
PanelView Plus 700 to 1500 Terminals
Functional Earth to Ground Bus
3-position Terminal Block
Series A - D Logic Modules
+
–
Functional Earth (optional)
DC +
DC -
PanelView Plus 400 and 600 Terminals
11
2-position Terminal Block
Series E or Later Logic Modules
+
–
DC +
DC -
+
–
DC +
Functional Earth
DC -
to Ground Bus