Screen Copy; Chapter 11- Auxiliary Function Setting; System Upgrade - UNI-T UTD2000CEX-II Series User Manual

UTD2000CEX-II
User Manual
After the waveform is saved, you can use the REF key for callback. Press
the REF key to enter the waveform callback menu.
Waveform Callback Menu
Options Descriptions
Functions
Type
RefA、RefB
When Save key is pressed, waveform
DSO
will be saved to the oscilloscope
Disk
When Save key is pressed, waveform
USB
will be saved to external USB device
Callback previously saved
Callback
waveform and display on screen
Clear Close current REF waveform
After callback, the Ref waveform will be displayed in the lower left corner,
including timing scale and amplitude shift. At this point you can use the
vertical and horizontal control knob to adjust the ref waveform's position,
time base, and amplitude shift.

10.3 Screen Copy

The PrtSc key can be used to store the current screen in BMP format to
an external USB storage device. The bitmap can be opened directly on
the PC. This function can only be used when external USB storage devices
are connected.

Chapter 11- Auxiliary Function Setting

Press the UTILITY key to enter the auxiliary function settings menu.
Auxiliary function setting menu (1)
Options Descriptions
Functions
System configuration Enter system configuration page
Interface configuration Enter interface configuration page
Enter pass test page
Pass test
Enter wave record page
Wave record
Enters Auxiliary function setting menu (2)
1/3
Auxiliary function settings menu (2)
Descriptions
Functions Options
Measurement unit V/A
AUTO strategy Enter AUTO strategy page
Enters Auxiliary function setting menu (3)
2/3
Note: The frequency meter is a counter for trigger events. The frequency
meter is valid for edge or pulse width, but is not valid for the other trigger
type .
Auxiliary function settings menu (3)
Options
Functions
Recorder
waveform generator
1Hz/10Hz/100Hz/
Square wave output
1kHz/10kHz/100kHz

System Upgrade

Descriptions
Enter recorder page
Enter waveform generator page
Set up frequency of reference
waveform
Enter oscilloscope software
update page