Chapter 15 - Appendix; Appendix A: Accessories And Options; Appendix B: Maintenance - UNI-T UTD2000CEX-II Series User Manual

UTD2000CEX-II
User Manual
Power Supply
Power Supply
100V～240VACrms
Voltage
Frequency
50Hz～60Hz
3A，T level，250V
Fuse
Environment
Operational：0℃～+40℃
Temperature
Range
Non-Operational：-20℃～+70℃
Cooling Forced cooling fan
Operational：below +35℃ ≤90％Relative humidity
Humidity
range
Non-operational：+35℃～+40℃ ≤60％Relative humidity
Operational：Below 3000m；
Altitude
Non-operational：Below 15,000m
Mechanical Specifications
336mm(W)×164mm(H)×108(D)mm
Size
Weight 3.5kg
Maintenance Period
Recommend to perform calibration once a year

Chapter 15 - Appendix

Appendix A – Accessories and Options
UTD2072CEX-II
MODE
UTD2102CEX-II
Power line meets local country standard
USB data cable
Standard
2 sets of passive probes (100MHz)
accessories
Quick guide
CD (Includes manual and application software)
For all accessories (standard and optional), please order at UNI-T local
dealers
Appendix B – Maintenance and Cleaning
(1) General Maintenance
Do not store or place the instrument and liquid crystal display in direct
sunlight. Caution: do not spray liquid or solvent on the instrument or probe.
(2) Clean
Refer to the operating conditions of the instrument and probe and perform
frequent checks. Clean the outer surface of the instrument according to the
following steps:
Please use a soft cloth to wipe the dust off probes and the instrument.
When cleaning the LCD screen, please pay attention and protect the LCD
screen.
Please disconnect the power supply, then with a damp but not dripping soft
cloth, wipe the instrument.
Do not use any chemical abrasive cleaning agent on the instrument or probes.