Recorder; Waveform Generator; System Upgrade - UNI-T UTD2000CEX-II Series User Manual

11.6 Recorder

Recorder operation menu
Options Descriptions
Functions
Pay back the record datas
Run
Stop Stop recording
Record Start to record
Setup Enter record setting menu
Recorder setting menu
Options Descriptions
Functions
When Playback, Use Multipurpose
Coarse / fine
key to control step size
adjustment
Use Multipurpose key to adjust
Interval
the time , Max up to 1000s
Point by point
Playback mode the playback mode Piont or Frame
frame by frame
On /Off
Cycle playback

11.7 Waveform generator

Waveform generator menu (1)
Options Descriptions
Functions
Output Turn on /off AWG output
On/Off
sine wave
square wave
waveform Sawtooth wave To select the base waveform
Triangular wave
Pulse wave
Setup Enter the parameter menu setting
Waveform generator menu (2)
Options Descriptions
Functions
frequency Use Multipurpose key to adjust signal frequency
amplitude Use Multipurpose key to adjust signal amplitude
Shifting Use Multipurpose key to adjust signal Shifting
Pulse width Modify Pulse width for pulse signal,
/duty cycle/ Modify duty cycle for square wave signal,
symmetry Modify symmetry for sawtooth wave

11.8 System Upgrade

This series oscilloscope can use USB disk to upgrade the software to give
users a more convenient and flexible experience. To use this feature, please
follow the following steps:
① Press UTILITY to enter the auxiliary function menu, press F1 to view
system information, access the machine's model number , software, and
hardware version information.
UTD2000CEX-II
User Manual