How To Change The Set Temperature For The Boiler - Naturela NPBC-V3C-1 User Manual

Electronic pellet burner controller – NPBC-V3C-1/ NPBC-V4C-1
of the work phases (Cleaning, Ignition, Unfolding fire, Power modulation, Suspend mode and
Intermediate cleaning) are executed according to the set parameters for the currently selected fuel type.
While in Timers mode, the burner works only during the time intervals when its work is allowed.
These time intervals can be set from the menu Timers in User Settings. If Timers mode is selected, but
there are no active timers set, the burner remains off and a warning message is displayed on the screen.
As soon as any of the timers is activated, the burner will switch to Timers mode automatically:

How to change the set temperature for the boiler

▲ ▼)
Press the up or down navigation buttons ( or while on main screen to enter the Set Temperature
menu. Press the up or down navigation buttons again to change the value in the relevant direction.

Hold the button to change the value with 5°C per second. Press the button (Menu) to save the
changes and return to the main screen or press no buttons for 5 seconds to exit the menu without
saving.
User Manual / ver 3.8 http://www.naturela-bg.com/en/ page 13 of 36