Gauge Set Up - Elcometer 319/2 Operating Instructions Manual

8 GAUGE SET UP

From MENU, scroll to Setup and press OK to configure and view the following set up options:
8.1 INTERVAL
Interval is the time period between measurements during automatic logging (Log
interval).
Each interval time (10s, 1m, 2m, etc.) is paired with the number of days the
measurements can be logged, taking into account the amount of free memory and
the interval time.
The total battery power remaining (% full) and the amount of free memory (% free) is
also displayed.
When a critical logging time is set, the message Low battery will be displayed instead
of % full. This means that the logging period cannot be fully used due to a lack of
battery power. Note that the gauge retains the data even if the batteries are empty.
You may need to change the batteries or change the interval time to be able to
complete interval logging.
18
Int. Log.
1m 6 days
2m 12 days
5m 30 days
10m 60 days
30m 180 days
Bat.: 73% full
Mem.: 55% free