Chevrolet Sonic 2012 Body Repair Manual page 97

BACK TO CHAPTER INDEX
General
Tracing Powder or Chalk Test
Clean the weatherstrips and the contact surfaces with cleaning solvent.
1. Apply powder or chalk in an unbroken line to the contact surface of the weatherstrip surrounding the perimeter of the
suspected areas.
2. Close the panel completely without slamming the panel. Closing the panel completely presses the weatherstrip firmly against
the mating surface.
3. Inspect the applied line on the weatherstrip. The applied line is marred where contact is good. A corresponding imprint is on
the mating surfaces.
4. Gaps or irregularities in the powder or the chalk line on the mating surfaces indicate the areas with a poor seal.
GENERAL INFORMATION
© 2011 General Motors. All rights reserved.
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
0-1