BACK TO CHAPTER INDEX
Wipers and Washers
Windshield Wiper System Module Replacement
Callout
Preliminary Procedures
1. Open and support the hood assembly.
2. Remove the air inlet grille panel. Refer to
Windshield Wiper System Module Bolt (Qty: 2)
Caution:
1
Fastener Caution
Tighten
18 N·m (13 lb ft)
Windshield Wiper System Module
Procedure
2
1. Lift the wiper system module from the plenum brackets.
2. Disconnect the electrical connector from the windshield wiper motor.
3. Remove the windshield wiper system module from the plenum.
Air Inlet Grille Panel Replacement
Refer to
.
© 2011 General Motors. All rights reserved.
BODY SYSTEMS
Component Name
.
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
0-4