Chevrolet Sonic 2012 Body Repair Manual page 191

BACK TO CHAPTER INDEX
InteriorTrim
Windshield Side Garnish Molding Replacement
Callout
Preliminary Procedures
Disable the SIR system, if equipped. Refer to
Windshield Side Garnish Molding Assembly
Procedure
1
1. Tabs must be installed prior to retainers.
2. Tabs to be fully seated in the instrument panel (I/P) trim panel retainer and valance panel.
3. Disconnect the electrical connectors.
4. Ensure the tether is reattached when installed.
BODY HARDWARE AND TRIM
Component Name
SIR Disabling and Enabling .
© 2011 General Motors. All rights reserved.
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
0-2