Chevrolet Sonic 2012 Body Repair Manual page 589

Hide thumbs Also See for Sonic 2012:

Table of Contents

BACK TO CHAPTER INDEX

Sunroof Window Seal Replacement

Removal Procedure

1. Remove the sunroof window panel. Refer to

2. Remove the seal from the window panel frame by pulling the seal away at one point and continuing around the perimeter of

3. Clean around the edge of the inside surface of the window with a 50/50 mixture of isopropyl alcohol and water by volume on

a dampened lint free cloth, allow to air dry.

Installation Procedure

1. Using a clean dampened cloth wipe the seal with a small amount of the same window cleaner in order to ease installation.

2. Position the sunroof window panel seal onto the window frame, locating the starting end of the seal at the relief notch in the

center of the passenger side of the frame.

Note: Ensure that the seal is properly seated around the entire perimeter of the window frame.

3. Firmly press the window seal into the retainer edge of the sunroof window, a 50/50 mixture of soap and water by volume will

help in the installation.

4. Install the sunroof window panel. Refer to

5. Adjust the window panel height. Refer to

6. Inspect sunroof for proper operation.

Sunroof Window Replacement

Sunroof Window Height and Opening Fit Adjustment

CHEVROLET SONIC 2012 BODY REPAIR MANUAL

TO MODEL INDEX

Show Quick Links

Table of Contents