Chevrolet Sonic 2012 Body Repair Manual page 264

BACK TO CHAPTER INDEX
Bumpers and Fascias
Front Bumper Fascia Replacement
Callout
Preliminary Procedures
1. Remove the radiator opening upper cover. Refer to
2. Remove the front bumper opening lower cover. Refer to
3. Remove the front wheelhouse front liner. Refer to
4. Disconnect the ambient air temperature sensor from the lower grille.
Front Bumper Fascia Screw (Qty: 2)
Caution: Refer to
1
Tighten
6 N·m (53 lb in)
Front Bumper Fascia Lower Screw (Qty: 2)
2
Tighten
6 N·m (53 lb in)
Front Bumper Fascia
Procedure
3
1. Carefully push a small nylon wedge between the fascia and the bracket. Insert a small flat-bladed tool into
the fascia slot and depress the tabs one at a time and pull the fascia wings off in the forward direction rather than
outboard to gradually remove the fascia from the bracket.
2. Disconnect the electrical connectors.
3. On reassembly of the front fascia to the vehicle, ensure the 4 support retainers on the inside of the radiator
grille bumper are in position to the front bumper fascia center support bracket.
BODY REPAIR
Component Name
Radiator Opening Upper Cover Replacement
Front Wheelhouse Liner Replacement
Fastener Caution .
© 2011 General Motors. All rights reserved.
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
Front Bumper Fascia Opening Lower Cover Replacement
.
TO MODEL INDEX
0-3
.
.