Chevrolet Sonic 2012 Body Repair Manual page 447

BACK TO CHAPTER INDEX
Fixed and Movable Windows
17. Use a cartridge-type caulking gun in order to apply a smooth, continuous bead.
Cut the applicator nozzle to provided a V cut to apply the auto-adhesive.
18. Install the window reveal molding, if equipped.
19. Use the edge of the window as a guide for the nozzle in order to apply the urethane adhesive (1) to the inner surface of the
window (3).
Note: If the locating pins were cut off it will be necessary to tape the window in place until the auto-adhesive cures per auto-
adhesive instructions by the manufacturer's.
20. With an assistant, align the window locating pins (2) to the slots located in each corner of the pinch-weld flange. Lower the
window (1) to touch the auto-adhesive.
BODY SYSTEMS
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
0-4