Chevrolet Sonic 2012 Body Repair Manual page 312

BACK TO CHAPTER INDEX CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
BODY REPAIR 0-3
Collision Repair
Installation Procedure
1. Drill 8 mm (5/16 in) holes for plug welding along the edges of the service panel as noted from the original panel (1).
2. Clean and prepare the attaching surfaces for welding.
3. Position the roof front header (1) panel on the vehicle.
4. Verify the fit of the panel.
5. Clamp the roof front header panel into position.
6. Plug weld accordingly (1).
7. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair .
8. Paint the repaired area. Refer to Basecoat/Clearcoat Paint Systems .
9. Install all related panels and components.
10. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
11. Enable the SIR system. Refer to SIR Disabling and Enabling .
© 2011 General Motors. All rights reserved.