Chevrolet Sonic 2012 Body Repair Manual page 644

BACK TO CHAPTER INDEX
Seats
Rear Seat Back Cushion Cover and Pad Replacement (AMA 60% w/Split
Back)
Callout
Preliminary Procedure
1. Remove the rear seat back cushion. Refer to
2. Remove the rear seat head restraint guide. Refer to
3. Remove the rear seat back cushion latch release knob bezel. Refer to
Bezel Replacement
4. Remove the child seat back cushion cover. Refer to
5. Remove the rear seat back cushion pivot support. Refer to
6. Remove the rear seat shoulder belt guide opening bezel, if equipped. Refer to
Bezel Replacement
Rear Seat Back Cushion Cover
Procedure
1. Remove the seat back carpet.
2. Remove the rear seat center head restraint, if equipped.
1
3. Disengage the J-channel retainers from the seat back cushion frame.
4. Remove the hog rings from the under side of the rear seat back cushion cover.
5. Pull the cover away from the pad to disengage the hook and loop retainers.
6. If replacing the seat back panel, transfer components as necessary.
Note: When installing the rear seat back cushion cover, pull the cover tightly in all corners to ensure that no
creasing occurs.
2 Rear Seat Back Cushion Pad
SEATS
Component Name
Rear Seat Back Cushion Replacement
Rear Seat Head Restraint Guide Replacement
Rear Seat Back Cushion Latch Release Knob
Child Seat Back Cushion Cover Replacement
Rear Seat Back Cushion Pivot Support Replacement
© 2011 General Motors. All rights reserved.
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
Rear Seat Shoulder Belt Guide Opening
TO MODEL INDEX
0-7