Chevrolet Sonic 2012 Body Repair Manual page 85

BACK TO CHAPTER INDEX
General
Front Side Door Lock Cylinder Coding (Free Wheeling)
Special Tools
BO-49753 Assembly Tool
The door lock cylinder uses 8 of the 8 cut positions. The tumbler positions are staggered from side to side, 4 on one side and 4 on
the other, are not self-retaining, and are not snap in.
Note: All lock cylinders for side milled keys have right and left tumblers. The location of the tooth of the tumbler determines
whether it is right of left. Illustrations in this procedure show the right tumblers on the top and the left tumblers on the
bottom. All tumblers are marked 1R, 1L, 2R, or 2L. The number being cut depth and the letter meaning right or left.
1. Hold the door lock cylinder (1) so the side with the 4 tumbler spring pockets faces up, pocket nearest to the cylinder head.
2. Insert the tumbler springs (2) into the 4 spring pockets. This side uses left tumblers.
3. Install the tumbler (3) for key cut position one in the slot nearest to the front of the lock cylinder. Install the remaining
tumblers, key cut positions 3, 5, and 7, following the key code and same process. Press the tumblers in place until they are
secure.
4. Check the correct loading of the tumblers by inserting the key into the cylinder. All tumblers should be flush with the lock
cylinder body.
5. Turn the cylinder so the side with the 4 tumbler spring wells faces up. This side uses right tumblers.
6. Insert the tumbler springs into the 4 spring pockets.
7. The first tumbler closest to the front of the lock cylinder to be loaded will be the second key cut position, the second number
in the key code. Install the remaining tumblers for the key cut positions 4, 6, and 8. Press the tumblers in place until they are
secure.
8. Check the correct loading of the tumblers by inserting the key into the cylinder. All tumblers should be flush with the lock
cylinder body.
9. Insert the key and lightly lubricate the cylinder body diameter and tumbler surfaces and a small amount in the head of the
cylinder using the supplied grease.
10. Insert the sleeve (4) onto the cylinder assembly.
11. Insert the clutch (5) and driver (6) onto the cylinder (1).
GENERAL INFORMATION
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
0-1