Chevrolet Sonic 2012 Body Repair Manual page 103

BACK TO CHAPTER INDEX
General
Air Hose Test
Caution: The air hose test should only be used on fully cured urethane adhesive. Otherwise, damage to the urethane
adhesive bead could result in additional leaks.
1. Using a liquid detergent, diluted with water in a spray bottle, spray the window at the edges. Begin at the bottom and
gradually move up and across the top.
Note: The compressed air should not exceed 205 kPa (30 psi).
2. Have an assistant inside of the vehicle with an air hose.
3. Have the assistant aim the compressed air at the suspected areas.
Bubbles will form in the soap solution at the location of the leak.
GENERAL INFORMATION
© 2011 General Motors. All rights reserved.
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
TO MODEL INDEX
0-1