Chevrolet Sonic 2012 Body Repair Manual page 485

BACK TO CHAPTER INDEX
Lighting
High Mount Stop Lamp Replacement (Sedan)
Callout
Preliminary Procedure
1. Remove the rear window panel trim. Refer to
2. Place the rear window panel trim face down on a clean protected surface to access and remove the high mount stop
lamp screws.
High Mount Stop Lamp Screw (Qty: 2)
1
Caution:
Fastener Caution
High Mount Stop Lamp
2
Tip
The high mount stop lamp is (LED) Light Emitting Diode and is serviced as an assembly.
Rear Window Panel Trim Replacement
Refer to
.
© 2011 General Motors. All rights reserved.
BODY SYSTEMS
Component Name
CHEVROLET SONIC 2012 BODY REPAIR MANUAL
.
TO MODEL INDEX
0-4