Table of Contents
Advertisement
2-2-2 Removal of the Front Panel
1. Remove the Jog Dial on the Front Panel.
2. Unscrew the 2 screws ( B ) as shown in the Figure.
3. Unlock 2 locking portions ( F1 ), and carefully pull out
the Front Panel from the deck (Figure D3. ).
Front Panel
2 Screws (B)
[Top View
1
@ @
2 Locking Portions (F1)
[ Bottom View
1
Firure D3
2-2-3. Removal of the Bottom Plate
1. Unscrew 6 screws (C)on the Bottom Plate.
2.
Lift
off the Bottom Plate (Figure D4. ).
[ Bottom View]
Bottom Plate
6 Screws (C)
Figure D4
2-2-4. Removal of the Timer and Operation C.B.A.
1. Disconnect the 2 Flexible Wires from the connector
P6701 and P6702 on the Timer and Operation
C.B.A ..
2. Unscrew the 2 screws (D) and a screw ( D-1 ) on the
Timer and Operation C.B.A and unlock 5 locking
portions (F2).
3. Carefully remove the Timer and Operation C.B.A.
(Figure D5. )
5 Locking Portions (F2)
[ Front View]
screw ( D-1 )
01101101
P6702
Timer & Operation 2 Screws
P6701
C.B.A.
(D)
Figure D5
2-2-5. Removal of the Cassette Compartment Unit
1. Unscrew 2 screws(E) and slide the Cassette Holder
Until appearing 2 screws (F) and then unscrew 2
screws (F) (Figure D6. ).
2. Disconnect the Flexible Wire from connector P1508
mounted on the Front Loading C.B.A., then carefully
pull out the Cassette Compartment Unit.
[Top View]
Cassette
2 Screws (E)
Compartment
2 Screws (F)
P1508
Figure D6
2-3
>-
-I
ca
~
w
(/)
(/)
«
(/)
c
Advertisement
Chapters
Table of Contents
