Removal Of The Reel Drive C.b; Removal Of The Mother C.b - Panasonic AG-MD830E Service Manual

>-
...J
aJ
::2:
w
en
en
«
en
o
[ Front View
1
2 Screws (M)
@ @
Figure D13-2
2-2-14 Removal of the System Control & Servo C.B.A.
1. Unscrew the 4 screws ( N ) on the System Control
&
Servo C.B.A. and carefully open the System Control
& Servo C.B.A. as shown in Figure D14.
[ Bottom View
1
System Control
& S C B A
4 Screws ( N )
ervo . . .
Figure D14
2-6
2-2-15 Removal of the Reel Drive C.B.A.
1. Disconnect the 4 Flexible Wires from the P2701 ,
P2702,P2704 and P2705 on the Reel DriveC.B.A ..
2. Unlock the 3 clamps ( F3 ) on the Reel Drive C.B.A..
3. Remove the Reel Drive C.B.A..
[ Bottom View
1
P2705 P2701 P2702
P2704 Locking Clamps ( F3 )
Figure D15
2-2-16 Removal of the Mother C.B.A.
Note: Before removing the Mother C.B.A., be sure to
remove the Power Unit, Rear Jack C.B.A., Video
Video ( 1 ), (2) and (3) C.B.A., Audio C.B.A.,
and System control & servo C.B.A ..
1. Unscrews the 4 screws ( 0 ) on the Mather C.B.A ..
2. Carefully pull out the Mother C.B.A..
[ Bottom View
1
Mother C.B.A. 4 Screws (
0 )
Figure D16