Mechanical Adjustment Procedures; Flow Chart Of Tape Interchangeability Adjustment; Adjustment Of The Pull-Out Post (P5) Height; Adjustment Of The A/C Head - Panasonic AG-MD830E Service Manual

.~
, Cl)
:z
'e:(
J:
(,)
w
:2
3-6. MECHANICAL ADJUSTMENT PROCEDURES
3-6-1. FLOW CHART OF TAPE INTERCHANGEABILITY ADJUSTMENT
AFTER RE-INSTALLING THE UPPER OR AFTER RE-INSTALLING THE INCLINED
LOWER CYLINDER
t
3-6-3. FINE ADJUSTMENT OF THE TAPE
GUIDE POST HEIGHT
t
3-6-6. COARSE ADJUSTMENT OF THE A/C
HEAD HORIZONTAL POSITION
t
3-6-7. FINE ADJUSTMENT OF THE A/C
HEAD HORIZONTAL POSITION
AFTER RE-INSTALLING THE A/C HEAD
t
3-6-5. ADJUSTMENT OF THE A/C HEAD
A.
COARSE ADJUSTMENT OF THE
A/C HEAD HEIGHT
B. COARSE ADJUSTMENT OF THE
A/C HEAD TILT
C. ADJUSTMENT OF THE A/C HEAD
AZIMUTH
D. ADJUSTMENT OF THE A/C HEAD
TILT AND AZIMUTH
E. ADJUSTMENT OF LOCK SCREW
F. FINE ADJUSTMENT OF THE A/C
HEAD HEIGHT
t
3-6-3. FINE ADJUSTMENT OF THE TAPE
GUIDE POST HEIGHT
t
3-6-6. COARSE ADJUSTMENT OF THE A/C
HEAD HORIZONTAL POSITION
t
3-6-7. FI NE ADJUSTMENT OF THE A/C
HEAD HORIZONTAL POSITION
3-16
BASE (S)
t
3-6-2. COARSE ADJUSTMENT OF THE P2, P3
POST HEIGHTS
t
3-6-3. FINE ADJUSTMENT OF THE TAPE
GUIDE POST HEIGHT
AFTER RE-INSTALLING THE INCLINED
BASE (T)
t
3-6-2. COARSE ADJUSTMENT OF THE P2, P3
POST HEIGHTS
t
3-6-8. ADJUSTMENT OF THE INCLINED BASE
(T)
t
3-6-3. FINE ADJUSTMENT OF THE TAPE
GUIDE POST HEIGHT
AFTER RE-INSTALLING THE PULL-OUT (P5)
POST
t
3-6-4. ADJUSTMENT OF THE PULL-OUT
POST (P5) HEIGHT
AFTER RE-I NSTALLI NG THE P2, P3 POST
t
3-6-2. COARSE ADJUSTMENT OF THE P2, P3
POST HEIGHTS
t
3-6-3. FINE ADJUSTMENT OF THE TAPE
GUIDE POST HEIGHT