12.
Attach the option to the drive. Properly seat the tabs on the left and right sides of the
option to the drive case.
Figure 16
13.
Connect the ground wire at the option ground terminal. Tighten the screw to
0.5 ~ 0.6 Nm or (4.4 ~ 5.3 in lbs) using an M3 Phillips screwdriver. Firmly plug the
CompoNet cable connector into the option.
Figure 17
Figure 17 Connect the Ground Wire and CompoNet Cable Connector to the Option
YASKAWA ELECTRIC TOBP C730600 54A V1000 Option CompoNet Installation Manual
Line up tabs
Line up tabs
Figure 16 Connect the Option
5 Installation Procedure
Option ground
terminal
25