Changing Parameters For Heat Regulations - Danfoss Link CC Installation Manual

Installation Guide

5 .2 . Changing parameters for Heat Regulations

Remove the front cover and press the SETUP pin for 3 seconds to enter the
service area.
Service Options
1
Rooms and Devices
Con gure Room
4
Heating Regulation
• Forecasting method: by activation of the forecast method, the system will
automatically predict the heating start-up time necessary to reach the desired
room temperature at desired time (all heat emitter types).
• Maximum floor temperature: the default setting is 35 °C (electrical floor
heating).
• Regulation type: only in connection with electrical heating systems.
24 12/2014
Danfoss Link™ CC
Rooms and Devices
2
Manage Existing Rooms
?
Heating Regulation
5
Choose a Setting
?
VISGL90N
Manage Existing Rooms
3
Select a Room
?
?
Danfoss Heating Solutions
?