Set Up Device On Rack Or Wall; Rack Mount; Install Rack Brackets - Cisco ASR-920-20SZ-M Hardware Installation Manual

Install the Router
Figure 5: Two Post Rack Type

Set up Device on Rack or Wall

You can choose to either set up the Cisco ASR 920 Router on a rack or wall mount it.

Rack Mount

You can choose to either set up the router in a horizontal or a vertical mounting position on the rack.

Install Rack Brackets

The device is shipped with rack mounting brackets that are to be secured on the sides of the device.
Procedure
Step 1 Remove the rack mounting brackets from the accessory kit and position them beside the device.
Note You can install the brackets at any of the 3 positions that are shown in the figure.
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
Set up Device on Rack or Wall
27