Ground the Device
Step 4
Position the device vertically on the wall.
Figure 18: Mounting the Router on the Wall
Caution
Ground the Device
Before you begin this task, ensure that you have read and understood the safety warnings in the
ESD Damage
Before you connect the power or turn on the power to the device, you must provide an adequate device ground
(earth) connection to your device.
This section describes how to ground the device. The grounding lug location is on the back panel of the device.
Cisco ASR-920-20SZ-M Aggregation Services Router Hardware Installation Guide
36
Before mounting the device, ensure that all unused holes at the sides of the device are protected
with screws.
section of the
Safety Warnings
handout topic.
Install the Router
Preventing