Installing 3D Printing Kit - Dobot Magician User Manual

During 3D printing, the 3D printing control software is required. You can use Repetier Host
or Cura software for 3D printing.
Reptier-Host: Reptier-Host can slice with the third party slicing (such as CuraEngine,

Slic3r, etc), check and modify G-Code, control 3D printing manually. More parameter
settings make Reptier-Host very flexible.
Cure: The slicing of Cura is fast and stable. It has strong inclusiveness to 3D model

structure and less parameter settings.
NOTICE
This section uses Windows as an example to describe how to perform 3D printing with
Repetier Host and Cura. For Mac OS, only Cura is supported.

Installing 3D Printing Kit

3D printing kit contains extruder, hot end, motor cable, filament, and filament holder as shown
in Figure 5.117.
Issue V1.0 (2018-09-11)
Dobot Magician User Guide
Figure 5.116 3D printing process
User Guide
101
Copyright © Yuejiang Technology Co., Ltd.
5 Operation