Fm 351 In The S7-300 - Siemens SIMATIC FM 351 Installation Manual

Product Overview
FM 351 in the
S7-300
1
Chapter Overview
1-2
The S7-300 Programmable Controller consists of a CPU and various signal
modules which are mounted on a rail.
You can operate a number of FM 351 Positioning Function Modules simulta-
neously. Combinations with other FM/CP modules are also possible. A typi-
cal application is the combination with an FM 352 Electronic Cam Control-
ler.
PC/PG
Rail
PS
CPU
IM
Figure 1-2 FM 351 in the S7-300
You will find the following subjects in this chapter:
Section
1.1 FM 351 Fields of Application
1.2 Components in Open-Loop Positioning
Parameter assignment
and set-up with FM-Config
and programming with
function blocks.
S7-300
SM
SM
FM 351
SM
SM
Contents
FM 351 Positioning Function Module
EWA 4NEB 720 6001-02
Page
1-3
1-4