Installing On The S7-300 Standard Rail - Siemens SCALANCE W788C-2 Series Operating Instructions Manual

Mounting

4.3 Installing on the S7-300 standard rail

4.3 Installing on the S7-300 standard rail
Follow the steps below to install the SCALANCE W7x8 on a vertical S7-300 rail:
1. Place the device on the upper edge of the S7-300 standard rail (position A).
2. Screw the device to the rail using the supplied screw (position B).
Figure 4-2
26
Installing on an S7-300 standard rail
SCALANCE W788C-2
Operating Instructions, 01/2017, A5E03692120-11