Advertisement
Quick Links
Assembly Instructions
Model 63036
The Big Work Center
GENERAL:
1. You have purchased model 63036.
2. Should you need assistance or need to replace a damaged or missing part simply give us a call M-F at
607-652-7321 from 7:30 am - 4:30 pm EST and we'll send you the prepaid part via UPS usually that same day!
You may also email us info@catskillcraftsmen.com.
3. Read the assembly instructions and the enclosed brochure before beginning assembly. Assembly is easy
if you read and follow the instructions step by step. Assembly instructions are described as you are facing an
upright assembled cart.
4. Tools required: hammer, a small and a medium Phillips head screwdriver and medium flat blade screwdriver.
A pencil is also needed. A power screwdriver will speed assembly, but is not required.
5. See our website www.catskillcraftsmen.com for assembly video on this model.
NOTE: one change to the video: use 5/8" #8 pan head screws to attach glides to the drawer and cabinet
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CATSKILL 63036
Summary of Contents for CATSKILL 63036
- Page 1 The Big Work Center GENERAL: 1. You have purchased model 63036. 2. Should you need assistance or need to replace a damaged or missing part simply give us a call M-F at 607-652-7321 from 7:30 am - 4:30 pm EST and we’ll send you the prepaid part via UPS usually that same day! You may also email us info@catskillcraftsmen.com.
-
Page 2: Cabinet Parts
False Drawer Front (1) P/N-D/F-26 7/8-4 1/2-63036F Edge Banding On Each Side Side Panel (2) P/N-SP-63036HDL Drawer Back (1) P/N-DBK-24 7/16-4 1/2-63036 Middle Shelf (1) P/N-MS-63036 Drawer Front (1) P/N-DF-26 7/8-4 1/2-63036 Left Drawer Side (1) Right Drawer Side (1) - Page 3 (Cabinet Assembly) (Drawer Back & Table Top Sticks) 1 1/4” Phillips Flat Head #8 Screw (8) (Attaches Top) 2” Phillips Flat Head #8 Screw (6) (Attaches Door Handles) 7/8” Truss Head Machine Screw (8) (Attaches Drawer Handles) 1” Truss Head Machine Screw (4) (Use on drawer &...
- Page 5 STEP 3 1” Pin Choose at which height you want the middle shelf Metal Shelf Pin 1 1/4” #8 Screw 2” #8 Screws Washer...
- Page 6 STEP 4 Not Used Not Used Not Used Not Used 1” Pan Head Machine Screw 3/4” Pin STEP 5 Make sure that you Install the False Drawer Front on the back of the cart. The Drawer glides that you installed in step 2 will extend out to the front of the cart.
- Page 7 STEP 6 1 3/4” Machine Screw STEP 7 1” Pan Head Machine Screw 1/2” #4 Screw 1 1/2” Pin...
- Page 8 STEP 8...
- Page 9 STEP 9 1 3/4” Machine Screw Washer...
- Page 10 STEP 10 Magnet A. Stick magnet to magnet plate on the right door. B. With left door open, close the right door. The magnet should be positioned over the wooden block on the bottom of the top front brace. Hold the magnet in place with your thumb, and open the right door. The magnet will be in the correct position on the block.
- Page 11 STEP 11...
-
Page 12: Set Screw
STEP 12 1 1/4” #8 Barrel Nut Set Screw 5/8” #6 Use the first and seventh hole 1” Machine Screw to attach glide to drawer side Bastion Post See next page for instructions on how the bastion fastening system works. - Page 13 TIPS ON HOW THE BASTION FASTENING SYSTEM WORKS 1. The Bastion fastening system consists of a steel post (threaded on one end with a hole through the shaft on the other end); a Barrel Nut (cylindrical barrel-shaped with threaded Illustration Bas. 1 open end &...
- Page 14 Visa and Address _____________________________ Mastercard are accepted online. City ________________________________ State ________________ Zip ___________ Catskill Craftsmen, Inc. Please make checks payable to Catskill Craftsmen Inc. 15 West End Ave. 15 West End Ave., Stamford, NY 12167-1296 Stamford, NY 12167-1296...
Need help?
Do you have a question about the 63036 and is the answer not in the manual?
Questions and answers