Installing The Leica Em Tic 3X On Leica Instrument Table - Leica EM TIC 3X Operating Manual

Ion beam milling system
Table of Contents

Advertisement

3.3.2 Installing the Leica EM TIC 3X on Leica instrument table

1. After placing the table in its position the rear leg has to be adjusted to
compensate for unevenness of the floor (use spirit level). This adjustment has
to be carried out before putting the instrument on the table.
2. The Leica instrument table has four recesses (a) to position the feet of the
instrument (a). In addition, four recesses to position the feet of the roughing
pump (b). When setting up the instrument, make sure all feet are properly
positioned in their recesses.
Page 23 Leica EM TIC 3X Operating Manual 07/17
a
b

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents